Drexel Hill Electrical Company serves homeowners, property managers, and commercial clients across Drexel Hill and Delaware County. From a dead outlet or a tripping breaker to a full panel upgrade or a whole-home rewiring, we handle the electrical work that keeps properties running safely. The scope covers repairs and troubleshooting, breaker panels and service upgrades, outlet and switch installation, indoor and outdoor lighting, ceiling fans, wiring, dedicated circuits, EV charger installation, backup generator hookups, and electrical safety inspections. No guesswork. No shortcuts. No loose ends.
Call and we'll get you back to full power.
Dealing with a tripping breaker or a dead outlet? Those symptoms point to real problems that get worse if they sit. Flickering lights, sparking or warm outlets, a burning smell near a panel or switch, buzzing from a breaker box, outlets that stopped working in one room while the rest of the house is fine - all of these have a root cause, and finding it is where the job starts.
A diagnostic visit covers a systematic check of the circuit or system showing the symptom. We test for shorts, check GFCI and AFCI protection where it applies, trace the fault back to its source, and give a clear explanation of what the fix involves before any work is scheduled. The customer knows what is wrong, what it takes to correct it, and what it costs.
Breakers that trip repeatedly, a panel that buzzes or runs warm, or a 100-amp service that can no longer keep up with the load in a modern home - these are signs the panel needs attention. We handle panel upgrades from 100-amp to 200-amp service, commercial panel upgrades, service-entrance and meter work, and load calculations to confirm the new panel can carry everything connected to it.
Drexel Hill has a lot of older housing stock, and the panels in those homes were sized for a different era. A panel that was adequate when the house was built may now be feeding a home office, an EV charger, a sump pump, and a full appliance load at the same time. Upgrading it is not optional at that point. This is electrical work done to the standard the next inspection expects.
Keeping a home safe starts with the wiring behind the walls, and in Delaware County that wiring is often older than it looks. Knob-and-tube wiring, aluminum branch circuit wiring, and ungrounded two-prong systems are all common in the area, and none of them meet current code. We handle knob-and-tube replacement, aluminum wiring remediation, whole-home rewiring, grounding and bonding corrections, and electrical code violation repair.
Arc-fault and ground-fault circuit breakers are part of that work where the code requires them. A rewire is a significant job, but the alternative - leaving wiring in place that cannot safely carry the load or meet inspection - is a liability that grows over time. We scope the work on the call, explain what is involved, and confirm the price before anything is scheduled.
Adding outlets to a room that never had enough, swapping in GFCI protection in kitchens and bathrooms, installing AFCI outlets where the panel does not already provide that protection, adding dimmer switches - these are among the most common calls we get, and they are also the ones most often put off. Code-compliant wiring on every job means the outlet or switch is wired correctly, grounded properly, and ready for inspection if one is required. Dedicated appliance circuits follow the same standard.
Recessed lighting, under-cabinet lighting, security lighting, motion sensor lights, and landscape lighting wiring each involve different considerations. An indoor recessed lighting project means working in the ceiling cavity, running wire to each can, and tying into the panel with a properly rated circuit. Outdoor lighting adds weatherproofing, conduit where required, and in some cases a new circuit from the panel to the exterior location.
We handle both, and we explain what the job involves before it starts. Pick up the phone and we'll handle the wiring.
Dealing with a tripping breaker or a dead outlet? Sometimes the issue is simpler: a ceiling fan that was never installed, or one that needs replacing because the box behind it was not rated for a fan's weight and movement. A ceiling fan visit covers the box support, the wiring, and the switch options - whether that is a standard wall switch, a dimmer, or a separate speed control. Where no existing wiring is present, we run the circuit from the panel and confirm the box location before anything goes up.
Homes and businesses need different wiring answers, but the question is the same: does the panel have the capacity for what is being added, and is the circuit sized correctly for the load? A clothes dryer, a refrigerator, a home office with a server rack, or a hot tub all require a dedicated circuit. We run the circuit from the panel, confirm the breaker is sized for the load, and check that the panel has room before the work begins. Permit requirements are confirmed at the time of booking.
A Level 2 EV charger runs on a 240-volt dedicated circuit, typically a 50-amp circuit for most home chargers. Before the visit, we confirm what the panel can support - if the panel is already near capacity, a service upgrade may be part of the conversation. On the visit, we run the circuit from the panel to the charger location, install the outlet or hardwire the unit depending on the charger type, and confirm everything is working before we leave. Customers who call ahead get a clear picture of what the job involves and what it costs.
A whole-home surge protector installs at the main panel and protects the entire electrical system from voltage spikes - not just the devices plugged into a power strip. For homes with a lot of electronics, smart-home equipment, or appliances with sensitive controls, it is a practical addition. A backup generator hookup involves installing a transfer switch at the panel so the generator can power selected circuits without backfeeding the utility line. We handle the transfer switch and the wiring. We are a straightforward choice for homeowners and property managers who want this work done correctly and explained clearly.
The homes and wiring in this area have their own quirks, and so do the commercial properties. Office wiring, retail electrical installation, commercial lighting, commercial outlet installation, and commercial panel upgrades each come with their own code requirements and load considerations. Electrical rough-in for new construction and failed inspection repair are part of the work we handle as well.
You're talking to someone who knows the area and the homes in it. That matters when the job involves a building that has been through multiple renovations, a panel that has been added to over the years, or a space that needs to meet current code before it can pass inspection. Electrical safety inspections, code-compliant wiring, and the documentation that goes with it are part of the commercial work we take on across Delaware County. Let us handle the panel and the permits.
A home electrical inspection covers the panel, the branch circuits, the grounding and bonding, GFCI and AFCI protection, and the condition of visible wiring. The most common triggers are a home purchase, a property that has not been inspected in years, older wiring that has never been evaluated, or a renovation that requires a sign-off before the work is closed up.
What an inspection finds determines what comes next. If the panel needs work, if outlets lack the required protection, or if the grounding system is incomplete, we explain what the code requires and what the correction involves. The inspection is the starting point, not the end of the conversation.
Calling an electrician does not have to be stressful, and getting a price should not require a visit before anyone will give you a number. When you call, we scope the job on the phone, explain what the work involves, and give you the price before anything is scheduled. You know what it covers and what it costs before we confirm a time.
After the call, the visit goes exactly as described. The work is carried out, the area is left clean, and the same number that booked the job is the number to call with any questions afterward. Not the biggest name in town. Just the one that answers. No runaround.
We serve Drexel Hill as our primary base and take calls from across Delaware County, including Springfield, Havertown, Upper Darby, Lansdowne, Folsom, and Ridley Park. If you are in the surrounding area and unsure whether we cover your location, call and ask.
We are available every day from 8:30 AM to 8:30 PM. Urgent electrical faults - a panel that is sparking, an outlet that is hot to the touch, a circuit that has gone dead without explanation - are calls we take seriously and schedule as quickly as the calendar allows. Call and we'll get you back to full power.
We work with homeowners, renters dealing with landlord-approved repairs, property managers, landlords with multi-unit buildings, and small business owners across Drexel Hill and Delaware County. The work ranges from a single outlet repair to a full commercial panel upgrade, and the process is the same regardless of the customer type: scope the job on the call, confirm the price, schedule the visit.
Delaware County has one of the highest concentrations of pre-1950 housing stock in the region, and the wiring conditions in those homes come up regularly in the work we do. Knob-and-tube systems, ungrounded two-prong outlets, and aluminum branch wiring are all common here. That familiarity shapes how we approach a job from the first call through the final inspection.
You reach someone who knows the trade and can scope the job on the phone. They can tell you what the visit involves, what the work requires, and what it will cost before anything is scheduled. The person who answers the phone can tell you what the visit involves.
We scope the job on the call by asking about the symptom, the location, and any relevant details about the property. From that, we give you a price before we schedule. If the job turns out to involve something that was not visible on the initial call, we explain what was found and confirm any change before the additional work is done.
Before we leave, we test the circuit, outlet, fixture, or panel work to confirm it is operating correctly. For outlet and switch work, that means testing under load. For panel work, it means confirming every breaker seats correctly and the labeling is accurate. We do not consider the job done until the work has been tested.
Call (484) 465-6289 and describe what is happening.
If the same fault has returned, we want to know about it. The cause of a recurring fault is not always fully visible on the first visit, particularly in older homes where wiring conditions can be layered, and a follow-up call is how we work through it.
Ask what the visit covers, what the price includes, and whether a permit is required for the job. Ask how long the work is expected to take and whether you need to prepare the space beforehand. We answer all of those on the call so there are no open questions before the visit.
Work that involves running wire through walls or ceilings is done with care to limit the size and number of openings needed. We use drop cloths where appropriate and take care around finished surfaces. The goal is to leave the space in the same condition it was in before the work started, apart from the completed installation.
Whether the job is a straightforward outlet repair, a panel upgrade, a whole-home rewiring, an EV charger installation, or a backup generator hookup, the process starts the same way: a call, a clear scope, and a price before anything is booked. We cover repairs, panels, wiring, lighting, ceiling fans, dedicated circuits, surge protection, and commercial electrical work across Drexel Hill and Delaware County.
Available every day, 8:30 AM to 8:30 PM.
Call (484) 465-6289 for a quote. No guesswork. No shortcuts. No loose ends.
Pick up the phone and we'll handle the wiring.
(484) 465-6289